話說前天跟她爹大吵一架，Daycare 接完孩子後，繼續吵。家中鍋碗瓢盆也飛滿天，夫妻倆咆哮的程度跟立法院差不多。可憐的孩子夾在爸媽中間，嚇得狂發抖，直喊”No!!”求求我們別再吵。非常非常糟糕的示範，請大家千萬不要學習。小孩何辜，大人吵完說完就算了，小孩目睹這一切，小小的心靈傷害不小。

或許是良知發現，我知道自己理虧，一直以來脾氣也不好，又加上懷mimi，脾氣更爆燥(mimi乖，sorry給麻當一下藉口哦。)，所以決定冷靜冷靜，先自己躲進廁所，過了一會才跑出來。接著抱著女兒洗澡去。女兒看我神色憂鬱，眼神認真地看著我，「Daddy罵你?」她問。我心一揪痛，心想女兒一切都看在眼(她爹也冤枉，明明也被我罵很慘，女兒心還是向我，覺得是我被罵)。但是我可沒落井下石，很公正的說:「Daddy沒有罵Mommy，我們只是在溝通。」妞又說:「你上廁所，Daddy，kick the door」。老公啊，你沒想到女兒一切都看在眼裡吧。這我可不知怎麼幫你Cover了，誰教你驚不起激，要狂踹門。只能含混地跟她說沒事。

哄妞扭睡覺一向是我的工作，睡覺前我們母女倆總是會一起看書、抱抱、親親、說說體己話 (平常洗完澡daddy會幫妞扭擦乳液穿衣服，然後陪妞扭一起看一下書，跳一下舞，或當馬給妞騎，再去做事。當然那晚Daddy是不會加入我們的)。以下妞扭當晚跟我的對話，

妞:「Mommy我喜歡Belle」，妞天真地說。

我:「我也喜歡Belle」。

妞:「我不喜歡Gaston (Beauty and the Beast中的獵人，想強娶Belle為妻)」，妞繼續說。

我:「我也不喜歡Gaston」。

妞:「我喜歡Daddy」，妞冷不防地說。

我: (低頭不語，沈思中，心中的OS:老娘氣沒消，沒罵你daddy就很好了)。

妞:「我喜歡Daddy啦，say it, say it」。(妞不死心，慧黠地雙眼咕嚕咕嚕轉透露著光芒)。

原來這孩子做和事佬來著。

雖然，我又隨便的唬哢過去，不願說我也喜歡她daddy。但我心中酸酸甜甜地。深切地提醒告切我自己，千萬不要在小孩面前吵架，也要改掉脾氣差、沒耐性的壞習慣。當然我知道我要守信。

JC跟阿妞妞上同一個Daycare。阿妞妞十個月大就先去Daycare，四五個月後，JC也來了。一開始，他們都在Guppy班，JC初來乍到不適應，整天哭哭找MOMMY&DADDY。聽ERIN說，阿妞妞就會陪JC坐在角落，拍拍JC跟他安慰不哭哭。到哪阿妞妞都會牽著JC的手，就像姐姐帶弟弟到處溜搭串門子。ERIN說阿妞妞就像是JC的BOSS，因為她會要求JC到哪都要跟著她、幫他午休時蓋被子拍拍、幫他脫鞋子又再幫他穿上、有人欺負JC時她會出面阻擋…有些時候我們去接阿妞妞也必須順便接JC，因為阿妞妞說JC要跟著她。恰好他倆年紀相差一個班級，兩三個月後、阿妞妞就被升級到Dophin班，他們倆也就只有在每一次有小孩年紀到換班時、才會在同一個班級遇到。我也不是很注意何時他們換班，但只要Michelle很高興的跟我們講說JC又怎樣怎樣的時候、或是JC如何如何哭得唏哩嘩啦，我們就知道今天他們倆肯定在同一班。

那一天，阿妞妞的心情也會特別好。

不是上課天，我們幾個比較要好的就會聚在一起，大人跟大人聊天，兩個年紀相近的JC和阿妞妞就會在一起玩。大概到八九點時，兩個小傢伙到了洗澡的時候，大人卻都還談興未減，這時兩個小傢伙就會一起洗澡。Karen幫阿妞妞洗、Jenny幫JC洗、兩個小傢伙就忙著互相潑水、玩ABC。洗好了，兩個小傢伙追著滿房間繞，就是不肯好好的穿衣服。阿妞妞叫JC、JC叫米笑偶，真是好不熱鬧。

生命中難得有一個年紀相仿的小孩跟你一起長大。寫這篇文章的時候，阿妞妞兩歲八個月，JC兩歲三個月，他們倆短短相處的時間，趣事瑣事好多好，多到我還有好多好多無法用文字詳述。她們倆既是姐弟又是青梅竹馬。還記得、一開始阿妞會使喚JC玩玩具。漸漸地、開始會搶玩具了，都是JC搶哭；後來、JC大一點了，就換阿妞妞哭。你弄我哭、我陪你笑。

明天JC就要跟爸爸跟奶奶出發去加州了。簽完了合約，JJJ在德州的實質資產就處理得差不多了。下午JACK帶玩具來給阿妞妞，阿妞妞跟媽媽爹地下去跟JC說掰掰時，JC哭哭了、阿妞妞卻笑笑鬧鬧的逗JC笑。晚上JACK又帶玩具來給阿妞妞了，阿妞妞卻沒太搭理JACK。睡覺前、阿妞妞抱著JACK剛剛送來的牧羊犬。我問她:這誰送的啊? 阿妞妞漾起燦爛的笑容說是Uncle Jack，I like it。

在我寫這篇文章的時候，阿妞妞睡了又哭、睡了又哭、就又睡著了；懷裡卻始終抱著牧羊犬。

Farewell! My Buddies.

• Direct log to IN56_threshold_noninvar.log.
  proc printto log=’D:\IRTfinalproject\TIV_small\IN56_threshold_noninvar.log’;

• Redirect log back to log window.
  PROC PRINTTO LOG=LOG; RUN;

OUTPUT:

• Stop displaying output
  %let _print_=off;  *stop showing output;
• Direct Output to IN56_threshold_noninvar.lst.
  PROC PRINTTO PRINT=‘D:\IRTfinalproject\TIV_small\IN56_threshold_noninvar.lst’; RUN;
• Redirect output back to output window
  PROC PRINTTO PRINT=PRINT;RUN;

*Mean Structure*;
ods rtf file=  ‘C:\jwu\Desktop\OneNote Notebooks\MLGC\out_mean.rtf’ style =journal;
OPTIONS ORIENTATION = landscape nonumber nodate ;
proc tabulate data= Mlgcresult_re order=DATA style={cellwidth=60 font= (“TImes  New Roman”, 8pt, Normal)};
keylabel sum =’ ‘;
Label ;
class  type CN CS/style={ font= (“TImes  New Roman”, 8pt, Normal)};
var IWWint IWWint_hat IWWint_hatSE  IWWint_hat95 IWWint_hatSig
SWWint SWWint_hat SWWint_hatSE  SWWint_hat95 SWWint_hatSig /style={ font= (“TImes  New Roman”, 8pt, Normal)} ;
table CN*CS, TYPE=”*(IWWint_hat IWWint_hatSE  IWWint_hat95 IWWint_hatSig
SWWint_hat SWWint_hatSE  SWWint_hat95 SWWint_hatSig)/ row=float misstext =’ ‘ style={font= (“TImes  New Roman”, 8pt, Normal)};
RUN;
Ods rtf close;

1. http://excelpro.blog.sohu.com/110142570.html
2. http://blogs.msdn.com/excel/archive/2007/11/16/chart-pattern-fills.aspx

The sample add-in with RibbonX and VBA code is here: http://officeblogs.net/excel/PatternUI.zip

While the Q1 datapoint is selected, launch the Visual Basic Editor by pressing ALT+F11.  In the Visual Basic Editor, press CTRL+G to display and move to the Immediate Window.

In the Immediate Window, type the following and press enter:   selection.fill.patterned (4)

This will apply the 4th indexed pattern to the selected chart element.  At this point the chart will be updated to look like this:

1. Go to Tools -> Settings -> Connection -> Network Destinations

2. Check if wizard had already managed to create IAP named as your WLAN SSID (=WLAN network name). If so then it’s most likely under “Internet” destination.

3. If you can see existing IAP named as your WLAN SSID then you can Edit that one. (skip to 7)

4. If you don’t see any existing IAPs that are named like your WLAN SSID then go to the desired “Destination” (e.g. Internet) and select Options -> Add Connection Method.

5. Assuming you are in the coverage area of your WLAN network you can let phone “Automatically check for connection methods” (i.e. scan available WLAN networks) and you should be able to select the correct WLAN network name (SSID) from the list. Once you have selected the WLAN network your “Destination” should now have been added with new Connection Method (IAP) named as your WLAN SSID. Note that at this point the particular connection method is still “incorrectly” configured (EAP-SIM & EAP-AKA enabled) for your purposes.

6. Now you should manually Edit your new connection method (IAP) with required PEAP settings.

7. Edit / ensure following WLAN settings manually from your connection method (IAP): -

• “Connection name” defaults to name of your WLAN SSID but you can also change this if you wish -
• “Data Bearer” naturally needs to be “Wireless LAN” -
• “WLAN network name” should match your WLAN network’s SSID exactly (do not edit) -
• “Network status” Public (if your WLAN network would be configured to hidden mode then set this to “Hidden” ) -
• “WLAN network mode”: Infrastructure -
• “WLAN Security mode”: WPA/WPA2 => Go to “WLAN security settings” -
  • Ensure that “WPA/WPA2 mode is set to “EAP” -
  • Leave “WPA-2 Only mode” to “Off” unless you are absolutely sure that your WLAN network is configured to stricly pure WPA2 mode (i.e. network might be supporting both WPA and WPA2 security thus enabling WPA-2 Only mode on the phone will cause your connection attempts to fail)
  • => Go to “EAP plug-in configuration” -
  • Enable “EAP-PEAP” and make sure that “EAP-SIM” and “EAP-AKA” are disabled (via Options -> Disable) => Select “Configure” for EAP-PEAP authentication method – Leave “Personal Certificate” to “Not defined” – Select “Godaddy class 2……(for TAMU)”
  • – Set “User name in use” to “User defined” (since there is no Personal Certificate where it could be read automatically) – Enter your username (NetID) to “Username” field -
  • Set “Realm in use” to “User defined” and leave following “Realm” field empty. – Note that in case your username (NetID) contains the realm (i.e. format is username@realm ) then you can enter realm part of your ID to “Realm” field and enter only the username part to the “Username” field.
  • - Configure “Allow PEAPv0″ to Yes – Configure both “Allow PEAPv1″ and “Allow PEAPv2″ to “No” => Go to “EAP’s” tab to configure inner authentication method for the PEAP (go right on the joystick)
  • - Enable “EAP-MSCHAPv2″ authentication method and Disable all other methods
  • - Select “Edit” for the EAP-MSCHAPv2 – Enter you username (NetID) to “User name” field – Configure “Prompt password” to No or Yes depending on whether you want password to be prompted everytime you make an connection or if you prefer “saving” your password to following “Password” field beforehand so that it won’t be prompted during the PEAP/EAP-MSCHAPv2 authentication process. – If you you selected “No” to password prompting then enter your password to “Password” field.
  • => Exit the connection method configuration with “Back” (several times) and you should be good to go and give this new PEAP-EAPMSCHAPv2 configured WLAN connection method a try.
  • If needed you can also change the priority order of the connection methods within a “Destination” since your new connection most likely ended up being lowest priority WLAN connection within your Internet destination (or whatever Destination you created this new PEAP WLAN connection method to). Please note that these instructions are an example (somewhat guess) based on the your description of the network settings. There are some uncertainties like what is the “inner” PEAP authentication method supposed to be since your description says “Auto”. Typically PEAP is used with EAP-MSCHAPv2 or EAP-GTC inner authentication methods so you might have to try swithing to EAP-GTC in case above mentioned EAP-MSCHAPv2 does not seem to work. Note that you might also have to try changing “PEAPv1″ to “Allowed” especially if you select EAP-GTC as an inner authentication method for PEAP. Another uncertainty is related to the “Authority Certificate”. Your N85 probably already contains pre-installed “Thawte Premium Server CA” certificate but it’s not possible to say for sure whether this pre-installed Thawte CA root certificate is the correct one to be used on your particular WLAN network.
  • Most likely it is OK but if in doubt you could try consulting your network administrators if they are able to provide you the correct Authority CA certicate in “X.509 DER” encoded binary file format so that you can install it on your N85 and select it from the PEAP settings instead of the preinstalled Thawte Premium CA certificate.

• *#92702689#

Speed up S60 3rd (from 痞子雲, mobile01)

• 行事曆=>選項=>新增項目=>代辦事項=>勾已完成
• 主旨:Speed
  到期日:2005/01/29 (yy/mm/dd)
  優先順序:高
  完成
• 再去行事曆=>選項=>新增項目=>代辦事項=>勾已完成
• 主旨:Qoukie
  到期日:2005/01/29 (yy/mm/dd)
  優先順序:低
  完成

N系列S60增加RAM並加速( from 官方說法, mobile01)

Music:

• 專輯圖片顯示: Use “Mp3tag” to attach album’s pic to all the designated mp3 files. Remember to save the tag after attach the pic. And then throw the mp3 folder containing the mp3 files and album pic to “Sound” in N95.
• 歌曲亂碼: correct the ID3 to unicode format. I am using “convertz802″ to batch process the mp3 files.

中文字型:

• Fontrouter: Follow the procedure here (special thanks to 喵喵).

• In order to use mass storage after installing fontrouter, move fontrouter.ini to C:\data\fonts by using Y-browser.
• 竹風字型

Garmin XT

• MAP:
  • connect the cell phone to the PC via “mass storage mode”